What we do

Zinc-rich primers to epoxy marine grades, intumescent fire protection to anti-fouling — applied to N1, N4 and SA standards by airless, conventional or thermal spray.

Manufacturers we apply

We work with paint from Leighs, International, Jotun, Ameron, Hempel, Coroless, Sigma, Remmers, Blakes and Coppercoat among others. Every protective coating we supply and apply can come with the manufacturer’s life-expectancy guarantee plus our own application guarantee.

Coverage

We supply and apply coatings to every market we work in — marine, industrial, commercial and domestic. That includes underwater paint for permanent steelwork protection, copper-coat anti-foul rated for up to 15 years, and high-build paint systems (1000 microns minimum) for the construction industry.

We coat steelwork, fibreglass, wood, brick and stone — and apply hot metal thermal spray in zinc, aluminium and copper for either protection or finish.

Scope of work

01 Zinc-rich primers and oxides
02 Epoxy marine-grade coatings
03 Top-coat enamels and 2-pack polymers
04 Anti-fouling and copper-coat
05 Hot metal thermal spray (zinc, aluminium, copper, brass)
06 Underwater paint for steelwork protection
07 Intumescent fire-protection coatings
08 Cementitious tanking and elastomeric systems
09 Anti-graffiti and anti-slip coatings

Methods and kit

→ Devilbiss conventional spray (car spray gun)
→ Graco airless sprayer
→ Thermal spray gun
→ Gravity spray hopper
→ HVLP (high volume low pressure)
→ Pressurised spray pots

Process

How a job runs.

Same shape every time, scaled to the job. Survey first, sign-off last, no surprises in the middle.

Step 01
Survey

Site visit or photo review to specify substrate, environment, and the right paint system. Fix the spec before anything gets ordered.
Step 02
Prep

Blast to SA standards — coarse media for steel, finer for non-ferrous, low-pressure bead for delicate work. Surface tested before primer.
Step 03
Spray

Airless, conventional or thermal spray depending on the system. Wet-film and dry-film thickness measured against spec, layer by layer.
Step 04
Sign-off

Pin-hole test on steel, salt test where required, photographs at each stage, manufacturer life-expectancy guarantee on the system applied.